What are common problems with excavator? Even if you adhere to a regular maintenance routine, things might still go wrong. Here are some of the most typical excavator issues along with their root causes.
These are merely common issues and their answers. To make sure your excavator is operating properly, first get in touch with your dealer or a nearby repair technician. Do not attempt to repair the issue yourself if you are not an authorized specialist.
MY EXCAVATOR IS STILL
There are several potential reasons for this. A charge pump issue, getting stuck in high-speed mode, a lack of pressure or flow in the hydraulics, or a blockage in a motor case drain line are examples of issues not related to the final drive or travel motor.
WHAT CAUSES IT TO BE SO HOT?
Smaller excavators may experience problems from overheating. When your excavator is having overheating troubles, some of the signs to watch out for include:
- Check the weight first.
- Next, check to see if the exhaust is operating correctly.
- Next, examine the radiator cap.
- Lastly, check to see if the radiator is clean.
WHY DOESN’T IT START?
There are several potential causes for this issue. Look at these things:
It would be better to use a voltmeter, if you have one, to verify the starter’s voltage.
The issue might be the directional joystick cable; look for any evidence of damage.
Check the wires on the starter.
Check to determine if the “dead man’s switch” has been activated as a precaution.
WHY DOESN’T MY EXCAVATOR WORK?
This issue typically results from a broken hydraulic system. The hydraulics should be inspected by a service professional. Some of the causes are as follows:
- corrosion-ridden hydraulic seals.
- outdated or damaged hydraulic drives
- a hydraulic pump problem.
Recent Comments