Heavy Construction Equipment Pile Driver How It Works

Heavy construction equipment pile driver, how does it work? A pile driving machine (also known as a pile driver) is a machine that drives piles into the earth to form a foundation for buildings and other large structures.

What Are Pile Driving Machines and How Do They Work?

Traditional pile drivers and vibratory pile drivers are the two primary types of pile driving machinery.

Traditional Pile Drivers

Traditional pile driving machines work by releasing a weight atop a pile, sliding down vertically, and smashing the pile into the earth. Mechanically, the weight is increased, and it can be propelled by hydraulics, steam, or diesel. The weight is discharged when it reaches its highest position. Gravity pulls the weight down and places it on top of the pile. The pile is hammered into the soil by the weight of the pile. This step is repeated until the pile is completely embedded in the ground.

Vibratory Pile Drivers

Vibratory pile driving machines (also known as vibratory hammers) create a vibration by spinning counterweights, causing a pile to “cut” into the soil below. A vibratory hammer acts like an electric knife cutting through flesh, whereas a typical pile driver works like a hammer and a nail. The earth gives way as a result of the high-speed vibration, allowing the pile to quickly sink into the ground.

Pile Driving Machines Are Required

Not every construction project will necessitate the use of piles or pile driving devices. Foundation piling is only required if the soil can no longer support the weight of the structure being constructed. This could happen if the construction site has a soft layer of soil on the surface that can’t withstand the weight of a new structure. Similarly, if a particularly large structure is being constructed, the surface soil will be unable to hold its weight. Foundation piling can be used to shift the weight of a structure from the surface of the soil to the stronger soil or rock underneath in both cases.

Pile Drivers Come in a Variety of Shapes and Sizes

Hammer with a Diesel Engine

A conventional pile driver driven by a huge two-stroke diesel engine is known as a diesel impact hammer (also known as a diesel pile hammer or a diesel pile driver).

Impact Hammer with Steam

A conventional pile driver propelled by compressed air or steam is known as a steam impact hammer.

Steam Impact Hammer

A hydraulic impact hammer is a third type of classic pile driver that uses a hydraulic system to propel it. Hydraulic impact hammers are regarded to be less harmful to the environment than diesel impact hammers.

Hydraulic Impact Hammer

Unlike traditional pile drivers, which smash piles into the earth with a high weight, vibratory hammers employ vibrations to move heaps into the soil and recover old piles from the ground.

Noise Issues to Consider

Noise pollution can be a concern with traditional pile driving devices that use a weight to force a pile into the earth. The impact of the hammer hitting the pile, or the collisions between the components of a hammer, produces the most noticeable noise from a pile driver, which can be disturbing to people and wildlife. Vibratory hammers, on the other hand, are quieter because they don’t use a hammer-weight mechanism.

Source

Buying Heavy Construction Equipment with Equipment Planet

Do you have Idle Machinery?

Or Trucks?

And Oilfield?

We Want to buy It!

Call our team of experienced buyers today to get a REAL offer on anything from idle trucks and equipment to trailers, oilfield and anything else you want to sell to improve your companies bottom line and save on cost associated with insurance.
We will Buy on the spot, we are guaranteed to make you a CASH offer. Visit sellyourconstructionequipment.com or call 214-773-0207.

Other Related Articles